Finding the precise honda crv scissor jack placement points is essential for anyone looking to complete basic roadside repairs safely. Here at Vroomdan, we understand how intimidating it can be to lift your family SUV without damaging its frame or body panels. Knowing how to lift your vehicle safely is just the beginning of mastering your SUV, which is why you should also check out some of the incredible hidden CR-V features that many owners don’t know about.
Your CR-V has a secret trick that starts the SUV when your key fob dies.
And 14 other things Honda never told you.
Dead fob fix · Global window down trick · The hidden folding picnic table · Walk Away Auto Lock · and 11 more.
▶ Read Now — Show Me Everything
bryansgarage.com · Bryan Mark
In This Guide
- Locating Factory Points: Learn exactly where the reinforced pinch welds are on every CR-V model year.
- Emergency Roadside Safety: Step-by-step instructions to change a flat tire safely without damaging body panels.
- Floor Jack & Jack Stands: How to properly support your vehicle’s weight for extensive DIY repairs.
- Avoiding Costly Damage: Master the safety protocols that prevent expensive frame and body repair bills.
Complete Guide to Honda CRV Scissor Jack Placement Points
Lifting a modern SUV can feel extremely intimidating if you are unfamiliar with the vehicle’s structural layout.
If you position your emergency jack incorrectly, you risk causing devastating structural damage to your rocker panels.
Understanding how to jack up a honda crv pinch welds is essential for avoiding damage.
The Honda CR-V uses a unibody construction, meaning the frame and body are integrated into a single strong structure.
This design requires specific reinforced areas to bear the load when lifting a heavy SUV.
These key spots are designated as the official honda crv emergency scissor jack lifting points.
You can easily locate these points by looking directly under the side rocker panels between the wheels.
There are four total scissor jack locations, with two on each side of the vehicle.
Each point features a thick, reinforced metal flange known as a pinch weld.
The factory scissor jack is specifically designed with a deep slot that fits over these metal flanges.
Using these points ensures the vehicle remains stable and safe throughout the lifting process.
Knowing how to identify these points provides the wonderful relief of self-reliance during an unexpected roadside emergency.
On older or pre-owned models, you should inspect the used honda crv scissor jack placement points for any signs of rust or bending before lifting.
Heavy rust on the pinch welds can weaken the metal and cause it to fail under load.
If you notice structural decay, do not use the scissor jack on that specific spot.
How to Raise Your Honda CR-V Safely: Step-by-Step DIY Guide
Before you begin, gather a scissor jack, a lug wrench, wheel chocks, and jack stands.
The total time required for this procedure is approximately fifteen to twenty minutes.
We always recommend wearing protective gloves to keep your hands clean and safe.
-
Secure Your Vehicle on Level Ground
Always park your Honda CR-V on a solid, completely flat concrete surface before lifting.
Engage the electronic parking brake fully to prevent the SUV from rolling while in the air.
Place heavy-duty wheel chocks on the tires opposite the corner you are lifting.
This vital step eliminates the terrifying anxiety of your vehicle sliding off the jack during the lift.
-
Locate the Reinforced Pinch Welds
Slide underneath the side sill of your SUV to inspect the metal edge running along the bottom.
Look for the two distinct notches cut into the metal flange near each wheel well.
These notches mark the exact locations for how to jack up a honda crv pinch welds safely.
Make sure you do not place the jack on the nearby plastic trim molding.
Lifting on the plastic trim will cause immediate, expensive cracking and structural damage.
-
Align and Raise the Scissor Jack
Place the scissor jack directly beneath the designated notch on the pinch weld.
Turn the jack screw clockwise by hand until the grooved head firmly cradles the metal flange.
Check that the base of the jack sits completely flat on the solid ground.
Slowly rotate the jack handle clockwise to lift the tire off the ground.
-
Secure the Vehicle with Jack Stands
Once the tire is off the ground, slide your safety jack stands under the solid frame rail.
Position the stands at the designated crv jack stand placement welds for maximum stability.
Slowly lower the scissor jack until the vehicle’s weight rests fully on the jack stands.
Never place any part of your body under a vehicle supported only by a temporary scissor jack.
At Team Vroomdan, we believe that simple maintenance tasks should not require a trip to the dealership.
By learning these basic skills, you can save money and gain confidence in your vehicle’s upkeep.
We invite you to read our comprehensive honda crv high mileage checklist to keep your family SUV running smoothly for hundreds of thousands of miles.
Floor Jack Lift Points Honda CRV Guide
A standard hydraulic floor jack is the preferred tool for home garage maintenance.
Using a floor jack allows you to lift the entire front or rear of your vehicle at once.
This is particularly useful when performing a complex task like a honda crv suspension replacement.
According to the official Honda workshop manual, you must use different lifting locations for a hydraulic floor jack.
Refer to our detailed honda crv floor jack placement points guide to find these locations.
The front central lift point is located on the reinforced engine subframe crossmember.
The rear central lift point is situated on the rear differential carrier for AWD models.
For front-wheel-drive models, you must use the heavy-duty tow hook bracket under the bumper.
Always use a rubber pad on your floor jack saddle to protect the metal from scratching.
Protecting this metal prevents rust from forming and preserves the structural integrity of your SUV.
Following this floor jack lift points honda crv guide prevents ruinous damage to your engine oil pan.
Correct CRV Jack Stand Placement Welds for Maintenance
Supporting your SUV with jack stands is a non-negotiable safety step for any DIY repair.
Once you raise the vehicle with a floor jack, you must place stands under the reinforced sills.
The correct locations for these stands are the crv jack stand placement welds.
These are the same reinforced pinch weld areas used for the emergency scissor jack.
Ensure the saddle of your jack stand matches the shape of the pinch weld flange.
Using a slotted rubber adapter on your jack stand saddle is highly recommended.
This adapter prevents the sharp metal head from bending the factory weld seam.
Keeping these seams straight ensures you can easily use your scissor jack in a future roadside emergency.
This simple precaution brings the immense comfort of knowing you did the job safely and correctly.
Overcoming Common DIY Lifting Mistakes
Many beginner DIYers make critical errors that compromise their safety.
One common mistake is jacking up a vehicle on unpaved surfaces like dirt or gravel.
A scissor jack can easily tip over if the ground shifts under the heavy load.
Another dangerous practice is using wood blocks between the jack and the pinch weld.
The wood can split suddenly, dropping the vehicle and causing catastrophic injury.
Never use power tools or impact wrenches to turn the screw of your emergency scissor jack.
The extreme torque will strip the threads of the jack and cause it to collapse instantly.
Avoid these simple mistakes to save yourself from tragic accidents and expensive vehicle damage.
Frequently Asked Questions
The factory scissor jack is stored in the rear cargo compartment.
Lift the carpeted cargo floor board to access the spare tire well.
The jack is secured inside a dedicated molded tool organizer next to the spare tire.
No, the factory scissor jack is designed strictly for emergency roadside use.
It is not stable enough to support a vehicle for extended maintenance sessions.
Always use a proper hydraulic floor jack and heavy-duty jack stands for home oil changes.
No, performing basic maintenance or lifting your vehicle at home does not void your warranty.
However, physical damage caused by improper jacking is not covered by the manufacturer.
Following the official lifting guide helps you avoid costly repairs that you would have to pay for out of pocket.
Inspect the metal seam for flaking, deep bubbling, or thinning steel.
If the metal crumbles when you touch it, the pinch weld is structurally compromised.
In this situation, consult an ASE certified mechanic to identify safe alternative frame lift points.
“I’ve driven a CR-V for 4 years and didn’t know this existed.”
— The most common reaction when this article is shared
Did you know your backup camera has a hidden top-down ‘drone view’? Or that your cruise control automatically downshifts on steep mountain hills to save your brakes?
bryansgarage.com · Bryan Mark
Conclusion
Mastering the scissor jack points on your Honda CR-V ensures you are always prepared for roadside emergencies.
Ready to get the most out of your SUV? Check out more guides on Vroomdan or email us at contact@vroomdan.com — our team is here to help you discover more SUV secrets and maintenance guides.
Disclaimer: Always consult your official Honda Owner’s Manual before performing any DIY modifications. Information provided is for educational purposes and depends on specific vehicle model years, trim levels, and individual modifications.