Choosing the correct 2017 chevy silverado oil type and precise fluid volume is essential to shield your engine from premature wear and avoid an exorbitant dealership bill during routine maintenance. At Vroomdan, our team of seasoned mechanics built this authoritative 2017 chevy silverado oil type capacity change guide to eliminate guesswork, keep your V8 running smoothly, and guide you straight into the practical maintenance knowledge and hidden tricks every truck owner deserves.
Your Silverado has a secret compartment hiding above your glove box.
And 8 other things Chevy never told you.
Hidden dash storage · Key fob window trick · Auto 4WD mode · Buckle to Drive · and 5 more.
▶ Read Now — Show Me Everything
bryansgarage.com · Bryan Mark · 2026
In This Guide
- Exact oil specifications and capacities for 5.3L, 6.2L, 4.3L, and Duramax engines.
- Step-by-step DIY oil change procedure with accurate torque specifications.
- How to reset oil monitor light steering buttons 2017 trucks utilize.
- How to prevent active fuel management oil burn chevy engines experience.
- Common DIY maintenance mistakes and professional prevention tips.
Complete Step-by-Step 2017 Chevy Silverado Oil Type and Change Tutorial
Finding the exact 2017 chevy silverado oil type requires checking your truck’s specific engine configuration before pouring fresh motor oil into the filler neck.
General Motors mandates the SAE 0W-20 full synthetic oil specification meeting dexos1 Gen 2 or Gen 3 standards for both the popular 5.3L V8 and 6.2L V8 EcoTec3 engines.
Using the wrong viscosity can lead to severe valvetrain chatter, poor fuel efficiency, and devastating engine failure over extended oil drain intervals.
If your truck features the 4.3L V6 engine, GM recommends SAE 5W-30 full synthetic motor oil with dexos1 certification.
Confirming your 2017 chevy silverado 1500 oil type before starting work ensures maximum internal hydraulic pressure for your Active Fuel Management (AFM) system.
Prerequisites and Tools Required
Before lifting your vehicle, gather a 15mm socket and wrench for the oil pan drain plug.
You will need an AC Delco PF63E oil filter, an oil filter wrench, a drain pan catching at least 10 quarts, clean shop rags, and safety glasses.
Allocate roughly 45 minutes of quiet driveway time to complete this job safely.
Always work on flat ground and secure your truck with wheel chocks before crawling underneath.
Step 1: Safely Elevate the Truck and Drain the Oil
Park your truck on a level concrete surface and engage the emergency parking brake firmly.
Locate oil drain plug filter access 2017 models position directly behind the front skid plate area.
Position your drain pan under the oil pan plug and carefully remove the 15mm bolt.
Allow the hot engine oil to drain completely for approximately ten to fifteen minutes until it slows to a steady drip.
WARNING: Engine oil reaches extreme temperatures during operation, so wear thick nitrile gloves to prevent painful skin burns.
Step 2: Replace the Oil Filter and Reinstall Drain Plug
Locate the oil filter mounted vertically on the driver side of the engine block near the oil pan.
Unscrew the old filter using your filter wrench and wipe the mounting surface clean with a lint-free rag.
Verify that the rubber O-ring gasket came off with the old filter to avoid severe double-gasket leaks.
Apply a thin film of clean oil to the rubber seal of the new AC Delco PF63E filter and spin it on hand-tight plus three-quarters of a turn.
Reinstall the drain plug with a fresh crush washer and torque it to exactly 18 lb-ft (25 Nm).
Step 3: Refill Motor Oil to Exact Capacity
Remove the oil fill cap located on the passenger side valve cover under the engine hood.
Pour in the precise fluid volume required by your engine configuration using a clean funnel.
For the standard 5.3L V8 engine, pour in the complete 8.0 quart oil pan capacity 2017 chevy trucks mandate.
Replace the oil cap, start the engine, and let it idle for two minutes while checking underneath for active leaks.
Turn off the ignition, wait five minutes for oil to settle into the sump, and verify the level on the dipstick.
Step 4: Reset the Driver Information Center Oil Life Monitor
Turn your ignition key to the ON position without starting the engine crank.
Use the keypad on the right side of the steering wheel to scroll through the Driver Information Center (DIC) menu to display Oil Life Remaining.
Press and hold the checkmark select button on the steering wheel until the system beeps and displays 100% Oil Life.
Turn off the ignition key to store the electronic reset memory successfully.
At Vroomdan, we provide comprehensive mechanical guides to help truck owners master routine maintenance without paying dealer rates.
Understanding Engine Specs and 2017 Chevy Silverado Oil Capacity
Knowing your exact 2017 chevy silverado oil capacity prevents hazardous overfilling that can foam oil and damage internal engine crankshaft seals.
General Motors engineered the Gen V EcoTec3 engine platform with larger oil sumps to support extended oil drain intervals up to 7,500 miles.
If you own the 5.3L V8 engine, your official 2017 chevy silverado 5.3 oil capacity is exactly 8.0 quarts (7.57 liters) including the filter replacement.
The 6.2L V8 engine shares this same 8.0 quart pan capacity and requires 0W-20 full synthetic fluid.
The table below summarizes every factory specification directly from the official General Motors Silverado owner’s manual.
| Engine Option | Recommended Oil Viscosity | Oil Capacity (With Filter) |
|---|---|---|
| 4.3L V6 EcoTec3 (LV3) | SAE 5W-30 Full Synthetic (dexos1) | 6.0 Quarts (5.7 Liters) |
| 5.3L V8 EcoTec3 (L83) | SAE 0W-20 Full Synthetic (dexos1) | 8.0 Quarts (7.57 Liters) |
| 6.2L V8 EcoTec3 (L86) | SAE 0W-20 Full Synthetic (dexos1) | 8.0 Quarts (7.57 Liters) |
| 6.0L V8 Vortec (HD Models) | SAE 5W-30 Full Synthetic (dexos1) | 6.0 Quarts (5.7 Liters) |
| 6.6L V8 Duramax Turbo-Diesel | SAE 15W-40 / 5W-40 Heavy Duty | 10.0 Quarts (9.5 Liters) |
Always double-check your dipstick after filling because oil cooler lines can hold additional fluid volume.
Active Fuel Management (AFM) and Preventing Engine Oil Burning
The 5.3L V8 engine relies on Active Fuel Management (AFM) to deactivate four cylinders under light loads to conserve fuel.
This system utilizes special hydraulic valve lifters controlled by oil pressure solenoids built inside the engine block valley cover.
When low-quality oil breaks down, carbon sludge builds up inside these narrow hydraulic passages and causes lifter collapse.
Using full synthetic dexos1 approved oil helps prevent active fuel management oil burn chevy trucks suffer from when maintenance is neglected.
Reports across Silverado community forums confirm that keeping oil levels topped off dramatically reduces premature valvetrain wear.
If you routinely tow heavy trailers, check your oil level on the dipstick every 1,000 miles to bring complete peace of mind on long highway trips.
Practical Maintenance Routines and Cost-Saving Tips
Performing your own oil changes saves you money while giving you a chance to inspect steering components and brake lines.
Never base your maintenance schedule solely on elapsed miles because towing severe loads degrades oil viscosity much faster.
Rely on your truck’s Oil Life Monitor system, which calculates engine oil degradation based on operating temperatures and engine revolutions.
Always purchase high-efficiency synthetic oil filters designed to withstand 22 psi bypass pressure ratings like the OEM AC Delco PF63E.
Cheap aftermarket filters often lack an anti-drainback valve, leading to noisy dry engine starts on cold mornings.
You can achieve substantial savings by purchasing 5-quart synthetic oil jugs from local auto supply stores rather than buying individual quarts.
Overcoming Common DIY Silverado Maintenance Mistakes
One frequent mistake DIY mechanics make is failing to check if the old rubber gasket stuck to the engine bypass housing.
Installing a new filter over an old rubber ring creates a double-gasket condition that instantly sprays hot oil across your driveway.
Another widespread error is overtightening the aluminum oil pan drain plug beyond factory specifications.
Overtightening strips the delicate pan threads, resulting in an infuriating repair bill to replace the entire oil pan assembly.
Always use a torque wrench set to 18 lb-ft to secure the drain plug properly.
Never substitute heavy 10W-30 conventional oil into a 5.3L V8 requiring 0W-20 fluid.
Thicker oil prevents fast hydraulic priming of the AFM lifters, leading to severe top-end valve tick on cold starts.
Frequently Asked Questions
Will changing my own oil void my Chevy factory warranty?
No, changing your own engine oil will not void your vehicle warranty under the federal Magnuson-Moss Warranty Act.
You must keep receipts for purchased oil and filters along with a written log recording the date and mileage of every service.
Ensure the oil used meets the official GM dexos1 specification to maintain full coverage.
What is the exact 2017 chevy silverado 5.3 oil capacity with filter replacement?
The exact 2017 chevy silverado 5.3 oil capacity is 8.0 US quarts (7.57 liters) when replacing the oil filter.
Always start by adding 7.5 quarts, run the engine briefly, and top off to the top hatch mark on the dipstick.
Can I use 5W-20 instead of 0W-20 full synthetic oil in my 5.3L Silverado?
GM specifically mandates 0W-20 full synthetic dexos1 certified oil for optimal fuel economy and low-temperature protection.
While 5W-20 will not destroy the engine immediately, 0W-20 flows significantly faster through AFM lifter passages during freezing cold morning starts.
How often should I change the oil in my 2017 Chevy Silverado 1500?
Change your oil when the DIC monitor indicates less than 15% life remaining or at least once every 7,500 miles or 12 months.
If you regularly tow trailers or idle extensively, change your oil every 5,000 miles to protect internal components.
“I’ve driven a Silverado for 5 years and didn’t know this existed.”
— The most common reaction when this article is shared
Did you know there’s a hidden storage compartment behind your rear seats? Or the button combo that switches your digital cluster to a completely different layout?
bryansgarage.com · July 28, 2026
Conclusion
Following the correct oil specifications and capacity guidelines protects your engine from wear and keeps your truck performing reliably.
Ready to get the most out of your truck?
Check out more guides on Vroomdan or email us at contact@vroomdan.com — our team is here to help you discover more truck secrets and maintenance guides.
Disclaimer: Always consult your official Chevy Owner’s Manual before performing any DIY modifications. Information provided is for educational purposes and depends on specific vehicle model years, trim levels, and individual modifications.